Ohm Speakers

Ohm Speakers offer Audio & Home Theater Equipment.

Ohm Speakers offering precise Stereo Imaging over the widest Sweet-Sweep from any speakers world-wide?

We at Ohm Speakers have spent over 30 years developing speakers that give you these benefits if you.

Audio magazine called another Ohm Walsh speaker, “A Masterpiece of the Speaker Designer’s Art” on their cover.

Ohm Custom Speakers products include; Ohm Walsh Series Speakers, Ohm Micro Walsh Speakers, Ohm Sub-Sat Series Speakers and Ohm Tiny Towers of Power Speakers.

Conventional Speakers | Sound Cylinders | Walsh Series | View Cart | Check Out

You have 0 items in your cart. Your Total is currently $0.00.

OHM 3

SPECIFICATIONS
Production Period	1985-1991
Nationally Advertised Price	originally $995 - $1195 per pair
Dimensions
Amplifiers Recommended	50 - 125 watts
Impedance (typical)	4 ohms
Frequency Response	35 - 20,000 Hz
Sensitivity @ 2.8 Volts	87 dB
Recommended Room Sizes	up to 330 sq.ft.

PURCHASE OPTIONS (Click for more info)	Item #	Price	Qty
Low Repair / each (Click for more info)		$200
High Repair / each (Click for more info)		$100
Metal Can / each (Click for more info)		$25
Grill / each (Click for more info)		$55
Total Driver / each (Click for more info)		$595
Crossover / each (Click for more info)		$150 **
Upgrade to S4-Mk2 / pair (Click for more info)		$1195 *

* = With the return of the original part for recycling within 60 days. = With the return of the original part for recycling before the shipment of the new part. * = Recycled, repaired and tested. **** = Per Pair
The Walsh 3 was the least sensitive of the second generation Walsh speakers. In its compact cabinet, just slightly bigger than the Walsh 2, it had deeper bass and higher treble than even the Walsh 4 (but in small to mediun sized rooms only). We used real wood veneer cabinets with an Ohm logo on the upper corner and a Walsh 3 logo next to it on the next side. There were 2 controls on the bottom, one to match the bass response to your room size (down for very small rooms, up for medium rooms and in the middle for small sized rooms.) The speakers should be set up so the Ohm logo is on the front of the left speaker and the Walsh 3 logo on the front of the right speaker. Placed 6 to 8 feet apart and about 1 foot from the wall give the smoothest bass and best imaging. Upgrade Options: The driver can be upgraded to the new Walsh 200 Mk-2 which allows for the bass to be extended down and the treble to have wider dispersion. All necessary parts can be installed with a screwdriver and hotglue gun and takes only 20 minutes. The upgrade comes with a 3 Year Limited Parts & Labor Warranty, assuring you of years of listening pleasure. Good Listening! Trade-In Options: Ohm allows up to $1195 for the return of a complete undamaged pair of Ohm 3s toward 25% of the purchase price of new Ohm speakers.